Hello,Welcome to——”WUHU QIYUN MACHINERY MANUFACTURING CO,.LTD“
NSE, NSE high-speed plate chain bucket elevator
NSE, NSE high-speed plate chain bucket elevator
NSE, NSE high-speed plate chain bucket elevator Characteristics:
Product specifications】:100/200/300/400/500/600/700/
800/900/1000
Running speed】:1.09(m/s)
Applicable materials】:Powder, granular, small block and other non-stick abrasive materials.
Material Bulk Density】:Less than 2.0 (t / m³)
Operating temperature】:Less than 250 degrees
Lifting capacity】:170-1000(/h) 
product manual:
    NSE, NSE Ⅱ high-speed plate chain bucket elevator is developed on the basis of the NE-type chain bucket elevator.It adopts the high-strength small-pitch plate chain as the traction part, which makes the lifting of the hopper Speed ​​increased by 1 times, greatly improving the bucket elevator to enhance the amount of lift and height.
  NSE, NSE Ⅱ high-speed plate chain bucket elevator mainly by the drive device, the upper device, the lower device, high-strength conveyor chain, hopper, the middle chassis, tensioning device, safety protection device.
  NSE, NSE Ⅱ high-speed plate chain bucket elevator performance parameters due to changes in delivery volume and delivery height, for this accurate specification models, transmission volume, chain speed, power, etc. through calculation to determine the user through the table below The initial selection, but also to provide us with access to the center and the distance from the material to enhance the height, volume, material name, block degrees, humidity, and other raw parameters required by the Wuhu engineers to help selection.
Product Features:
* Large capacity ultra-high: NSE, NSE Ⅱ high-speed chain bucket elevator uses a high-strength small pitch chain plate as a traction, making the hopper hoisting speed increased by 1 times, greatly improving the bucket elevator upgrade Capacity and lifting height, the maximum lifting capacity of up to 1200 cubic meters / hour, the maximum height can be raised to 60 meters.
* Long life: NSE, NSE Ⅱ high-speed chain bucket elevator structure design is more reasonable and effective to ensure that the material in the feeding, lifting and unloading will not be scattered, the reliability of running high-strength wear-resistant chain And inflow-type feeding greatly extend the chain and hopper life.
* Patented technology: NSEII plate chain bucket elevator is improved on the basis of NSE-based design of the new chain bucket elevator bucket, the lower structure of the patented technology using built-in bearings and heavy hammer tensioning device, sealed The sprockets of the upper and lower sprockets adopt the proprietary meshing technology, which makes the service life of the sprockets and the conveying chains in normal condition more than 30,000 hours without failure.
  NSEII-type plate bucket elevator is particularly suitable for chemical, metallurgical, building materials industry, powder, granular and small bulk material storage and feeding of the material with a large volume, stable operation, high temperature, abrasion resistance And other transportation characteristics.

 

NSE, NSE-type high-speed chain bucket elevator Technical parameters: