Bucket elevator Category: TH bucket elevator, TD belt bucket elevator, NE plate chain bucket elevator.

Ring bucket hopper Hopper form:

(1) cylindrical bucket: deep bucket, bucket mouth was 65o tilt, depth, for dry, good mobility, well scattered the delivery of granular materials.

(2) shallow bucket: the mouth was 45o tilt, depth, small, for the wet and flow of granular materials.

(3) angular bucket: the side wall extends to the outside of the floor, as the ribs, discharge, the material along the bucket and the bottom wall of the groove formed by the slot for heavy viscous and heavy block Material handling.

       TH bucket lift machine, TD bucket hopper hopper is circular hopper, NE bucket elevator is a sharp hopper. In this case,

       Attention to bucket elevator

The chain bucket elevator is used to vertically lift the granular materials such as limestone, coal, gypsum, clinker, dry clay through the crusher and raw materials such as raw material, cement and pulverized coal. According to the speed of hopper running speed different bucket elevator can be divided into: centrifugal discharge, gravity discharge and mixed discharge and other three forms. Centrifugal discharge speed of the bucket faster, suitable for conveying powder, granular, small pieces of small grinding materials such as grinding; gravitational discharge slow bucket speed, suitable for transport block, the proportion of large , Grinding cut of large materials, such as limestone, clinker and so on. Bucket elevator traction components are ring chain, plate chain and tape several. Chain bucket elevator structure and manufacture of relatively simple, and the hopper connection is also very strong, the transmission of grinding cut of large materials, the chain wear smaller, but its larger weight. Plate structure is relatively strong, light weight, suitable for lifting a large quantity of the elevator, but the articulated joints are easy to wear, the structure of the tape is relatively simple, but not suitable for conveying large materials, ordinary tape material temperature does not exceed 60 ° C, tape rope tape to allow the material temperature of 80 ° C, heat-resistant adhesive tape to allow the material temperature of 120 ° C, chain-link chain bucket elevator, chain bucket elevator conveying the material temperature up to 250 ° C.

Ring bucket elevator type selection: Process is as follows: Material gravity → transmission mode (Bucket mention) → material properties → discharge mode → hopper type → the series bucket elevator lift → determine the model.